Onshape vs. Solid Edge

Onshape shall be used by organizations where cost is a major factor as the license is relatively competitive than the competition. Where Onshape , excels the most is the ability to be operational on any device with internet connection and webbrowser. Onshape doesn't require your hardware to be beefed with Graphic cards (if added better). Where onshape can be better. If they are able to include simulation packages bundled like SOLIDWORKS.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Well Suited for:

• Integrated designs performed by multiple designers simultaneously (designs requiring a Product Lifecycle Management system);
• Designs requiring a high degree of parameterisation;
• Large companies where specific standards and best practices are applied to all models and drawings created.

Not Well Suited for:

• Personal use in designing one-off models and drawings;
• Small business use where very few of the expensive features are actually used.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Cloud-based infrastructure and collaboration is a primary benefit.
• The available documentation is extremely thorough.
• The ability to integrate with other software for simulation, renderings, etc. is fantastic.
• Not having to save and being able to clearly see versions and change history is excellent.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• It has very good user interface in classic or ordered environment.
• In 2D or drafting, you can give any Geometric tolerancing and symbols to any dimension. There is a wide range of options available.
• You can convert any files in step file (.stp) and can open it in other designing applications easily.
• After converting 3D drawings in 2D you can make changes in 2D drawing by converting it in the draft. You can also add details like cross-sections and detailed view.
• You can directly make threads without creating holes.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Dimensioning a hole feature in a drawing when there are multiple holes, the hole count does not parametrically update. For example, when there are 3x of the same hole, Onshape forces you to manually type in 3x instead of parametrically populating the hole count. This gets very dangerous if say, one of the 3x holes changes but you forget to update the 3x to 2x. Other CAD software does provide this.
• I know Onshape provides guidance on performance considerations and how to structure a project through their literature, however, a dedicated video from Onshape that directly addresses the guidelines on how to minimize file load and reload times would be beneficial to all future and current Onshape users. I think they should incorporate this directly in their training. Poindexter by Design went through the growing pains of this issue but through the Onshape literature and our own experiences we've developed guidelines on how to keep our Onshape performance maximized!

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Being used to 2-key and 3-key commands from the keyboard, it would be nice if this was more robust in Solid Edge. The capability of programming keystroke commands exists in Solid Edge, but it would be more user friendly in that regard.
• Editing hatches can be a challenge.
• I'm not a fan of the ribbon bar, but that seems to be a feature across software platforms in Windows.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Familiarity and ability to work from any location. Also easy to cooperate with potential customers, existing customers, systems users, and fabricating shops. Most of the standard designs are now in On Shape and I would like to continue using it. It is easier to run versions to clarify imrovements to the previous designs

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Onshape is great software and I have no trouble recommending it to CAD users and companies that need to do design work

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

As mentioned previously, Siemens Solid Edge is not the most user-friendly of products at all. It requires intense training to make sure that the basics are understood, and after that, there are numerous other training interventions needed to be able to perform expert-level CAD functions. The GUI is not intuitive, as many other packages are, and the features built-in are not well defined. The process to use many of these features is counter-intuitive and requires a mind-shift.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Been fairly standard experience with support team. Issues have always been addressed, but is understandably focused on business side applications which typically has different issues than education applications. I have very few IT issues with the design side of the software, my issues are more often with the control of users and access

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I have been involved with support and training of Solid Edge for 24 years. Given that I based my business model on support, and have been successful for all these years, I know excellent support. Siemens support for Solid Edge, "GTAC", is the definition of support for a product in every aspect.

I might be biased by coming from using three different CAD softwares in the past, so I already understood many modeling concepts, but the training OS offers is really good. Videos are clear, they explain operations in good detail and besides that OS has a really good help system that explains even more how every tool works.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Onshape is revolutionary. Its advantage is that it can be used without having to download it. You are free to work wherever you want. This means that even if you take a vacation or attend a family event, your work will not be interrupted. You can still bring your work and complete it quickly.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I have used SOLIDWORKS for over four years, and the vault system is time intensive for control of design history, and revision management. I have used Pro-E for over four years, and this has the capability but is not user-friendly. Not needing high-end computers is another great reason to choose Onshape

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

FreeCAD is often better than Solid Edge 2021 when converting files, but I hope this changes with 2023 NX is overall more powerful, but that is to be expected (and you cant add it above because it is too short for whatever reason).

Incentivized

Invited by TrustRadius (TR) on Vendor's Behalf

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Super fast idea to concept parts and prototypes
• So easy to share things with co-workers or higher management that I do it all the time
• No, IT support is needed so no IT cost and no hassle working with in-house IT and their way of doing things

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• It took about 20 hours of use to get the basics of Synchronous Technology, and with just a basic competency I was able to make useful changes to the design. One of those changes was impossible to do our other CAD program.
• My use lately has mostly been on personal time and self-driven, so learning other aspects and features of Solid Edge has been slower. Creating a drawing for a part required a few hours to learn and do the first time, but luckily there were YouTube videos for examples. With practice, I would expect the time to reflect what it takes in SolidWorks (about 30 minutes).

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info